# Upgrade guidelines

## 0.46.0 to 0.47.0

[Update Collector Endpoints to use Pod IP Instead of 0.0.0.0](https://github.com/open-telemetry/opentelemetry-helm-charts/pull/603)

The [Collector's security guidelines were updated](https://github.com/open-telemetry/opentelemetry-collector/pull/6959) to include containerized environments when discussing safeguards against denial of service attacks.
To be in compliance with the Collector's security best practices the chart has been updated to use the Collector's pod IP in place of `0.0.0.0`.

The chart will continue to allow complete configuration of the Collector via the `config` field in the values.yaml.  If pod IP does not suite your needs you can use `config` to set something different.

See [Security Best Practices docummentation](https://github.com/open-telemetry/opentelemetry-collector/blob/main/docs/security-best-practices.md#safeguards-against-denial-of-service-attacks) for more details.

## 0.40.7 to 0.41.0

[Require Kubernetes version 1.23 or later](https://github.com/open-telemetry/opentelemetry-helm-charts/pull/541)

If you enable use of a _HorizontalPodAutoscaler_ for the collector when running in the "deployment" mode by way of `.Values.autoscaling.enabled`, the manifest now uses the "autoscaling/v2" API group version, which [is available only as recently as Kubernetes version 1.23](https://kubernetes.io/blog/2021/12/07/kubernetes-1-23-release-announcement/#horizontalpodautoscaler-v2-graduates-to-ga). As [all previous versions of this API group are deprecated and removed as of Kubernetes version 1.26](https://kubernetes.io/docs/reference/using-api/deprecation-guide/#horizontalpodautoscaler-v126), we don't offer support for Kubernetes versions older than 1.23.

## 0.34.0 to 0.34.0

[config supports templating](TBD)

The chart now supports templating in `.Values.config`.  If you are currently using any `{{ }}` syntax in `.Values.yaml` it will now be rendered.  To escape existing instances of `{{ }}`, use ``` {{` <original content> `}} ```.  For example, `{{ REDACTED_EMAIL }}` becomes ``` {{` {{ REDACTED_EMAIL }} `}} ```.

## 0.28.0 to 0.29.0

[Reduce requested resources](https://github.com/open-telemetry/opentelemetry-helm-charts/pull/273)

Resource `limits` have been reduced. Upgrades/installs of chart 0.29.0 will now use fewer resources. In order to set the resources back to what they were, you will need to override the `resources` section in the `values.yaml`.

*Example*:

```yaml
resources:
  limits:
    cpu: 1
    memory: 2Gi
```

## 0.23.1 to 0.24.0

[Remove containerLogs in favor of presets.logsCollection]()

The ability to enable logs collection from the collector has been moved from `containerLogs.enabled` to `presets.logsCollection.enabled`. If you are currently using `containerLogs.enabled`, you should instead use the preset:

```yaml
presets:
  logsCollection:
    enabled: true
```

If you are using `containerLogs.enabled` and also enabling collection of the collector logs you can use `includeCollectorLogs`

```yaml
presets:
  logsCollection:
    enabled: true
    includeCollectorLogs: true
```

You no longer need to update `config.service.pipelines.logs` to include the filelog receiver yourself as the preset will automatically update the logs pipeline to include the filelog receiver.

The filelog's preset configuration can modified by `config.receivers`, but preset configuration cannot be removed.  If you need to remove any filelog receiver configuration generated by the preset you should not use the preset.  Instead, configure the filelog receiver manually in `config.receivers` and set any other necessary fields in the values.yaml to modify k8s as needed.

See the [daemonset-collector-logs example](https://github.com/open-telemetry/opentelemetry-helm-charts/tree/main/charts/opentelemetry-collector/examples/daemonset-collector-logs) to see an example of the preset in action.

## 0.18.0 to 0.19.0

[Remove agentCollector and standaloneCollector settings](https://github.com/open-telemetry/opentelemetry-helm-charts/pull/216)

The `agentCollector` and `standaloneCollector` config sections have been removed.  Upgrades/installs of chart 0.19.0 will fail if `agentCollector` or `standaloneCollector` are in the values.yaml.  See the [Migrate to mode](#migrate-to-mode) steps for instructions on how to replace `agentCollector` and `standaloneCollector` with `mode`.

## 0.13.0 to 0.14.0

[Remove two-deployment mode](https://github.com/open-telemetry/opentelemetry-helm-charts/pull/159)

The ability to install both the agent and standalone collectors simultaneous with the chart has been removed.  Installs/upgrades where both  `.Values.agentCollector.enabled` and `.Values.standloneCollector.enables` are true will fail.  `agentCollector` and `standloneCollector` have also be deprecated, but backward compatibility has been maintained.

### To run both a deployment and daemonset

Install a deployment version of the collector. This is done by setting `.Values.mode` to `deployment`

```yaml
mode: deployment
```

Next, install an daemonset version of the collector that is configured to send traffic to the previously installed deployment.  This is done by setting `.Values.mode` to `daemonset` and updating `.Values.config` so that data is exported to the deployment.

```yaml
mode: daemonset

config:
  exporters:
    otlp:
      endpoint: example-opentelemetry-collector:4317
      tls:
        insecure: true
  service:
    pipelines:
      logs:
        exporters:
         - otlp
         - logging
      metrics:
        exporters:
         - otlp
         - logging
      traces:
        exporters:
         - otlp
         - logging
```

See the [daemonset-and-deployment](examples/daemonset-and-deployment) example to see the rendered config.

### Migrate to `mode`:

The `agentCollector` and `standaloneCollector` sections in values.yaml have been deprecated. Instead there is a new field, `mode`, that determines if the collector is being installed as a daemonset or deployment.

```yaml
# Valid values are "daemonset" and "deployment".
# If set, agentCollector and standaloneCollector are ignored.
mode: <daemonset|deployment>
```

The following fields have also been added to the root-level to replace the depracated `agentCollector` and `standaloneCollector` settings.

```yaml
containerLogs:
  enabled: false

resources:
  limits:
    cpu: 1
    memory: 2Gi

podAnnotations: {}

podLabels: {}

# Host networking requested for this pod. Use the host's network namespace.
hostNetwork: false

# only used with deployment mode
replicaCount: 1

annotations: {}
```

When using `mode`, these settings should be used instead of their counterparts in `agentCollector` and `standaloneCollector`.

Set `mode` to `daemonset` if `agentCollector` was being used.  Move all `agentCollector` settings to the corresponding root-level setting.  If `agentCollector.configOverride` was being used, merge the settings with `.Values.config`.

Example agentCollector values.yaml:

```yaml
agentCollector:
  resources:
    limits:
      cpu: 3
      memory: 6Gi
  configOverride:
    receivers:
      hostmetrics:
        scrapers:
          cpu:
          disk:
          filesystem:
    service:
      pipelines:
        metrics:
          receivers: [otlp, prometheus, hostmetrics]
```

Example mode values.yaml:

```yaml
mode: daemonset

resources:
  limits:
    cpu: 3
    memory: 6Gi

config:
  receivers:
    hostmetrics:
      scrapers:
        cpu:
        disk:
        filesystem:
  service:
    pipelines:
      metrics:
        receivers: [otlp, prometheus, hostmetrics]
```

Set `mode` to `deployment` if `standaloneCollector` was being used.  Move all `standaloneCollector` settings to the corresponding root-level setting.  If `standaloneCollector.configOverride` was being used, merge the settings with `.Values.config`.

Example standaloneCollector values.yaml:

```yaml
standaloneCollector:
  enabled: true
  replicaCount: 2
  configOverride:
    receivers:
      podman_stats:
        endpoint: unix://run/podman/podman.sock
        timeout: 10s
        collection_interval: 10s
    service:
      pipelines:
        metrics:
          receivers: [otlp, prometheus, podman_stats]
```

Example mode values.yaml:

```yaml
mode: deployment

replicaCount: 2

config:
  receivers:
    receivers:
      podman_stats:
        endpoint: unix://run/podman/podman.sock
        timeout: 10s
        collection_interval: 10s
  service:
    pipelines:
      metrics:
        receivers: [otlp, prometheus, podman_stats]
```

Default configuration in `.Values.config` can now be removed with `null`.  When changing a pipeline, you must explicitly list all the components that are in the pipeline, including any default components.

*Example*: Disable metrics and logging pipelines and non-otlp receivers:

```yaml
config:
  receivers:
    jaeger: null
    prometheus: null
    zipkin: null
  service:
    pipelines:
      traces:
        receivers:
          - otlp
      metrics: null
      logs: null
```